he paper cup machine will inevitably encounter some problems during use, so what should I do if the paper cup machine encounters a failure? Regarding the maintenance and repair of paper cup machines and paper bowl machines, professional fitter skills are not required, but a little flexible mind is required. It is necessary to understand a little bit of cam mechanism, chain transmission mechanism, and some basic principles of the indexing box. Good lubrication and imprisonment are necessary conditions for the normal operation of the machine, and the influence of the temperature control of each heater on the cup after forming (adhesion). Too high or too low temperature will cause bursting or leakage at the bottom of the cup. But for the domestic cup machine, the most troublesome part is the knurling roller. This part is the key point. The pressure cannot be increased too much. For the ultrasonic welding machine, the ultrasonic frequency must be adjusted, and the pressure cannot be too large. , And please work hard to maintain pressure balance.
In short, no matter what kind of cup machine, please pay attention to the time coordination of each part and the stability of each rotating table and platform. Therefore, when the paper cup machine or paper bowl machine fails, the first thing to check is the above parts.
