The machine must be operated and maintained by full-time personnel, and please read this manual carefully before operation, and the operation must be carried out in strict accordance with the instruction; otherwise, the equipment damage or other consequences shall be borne by at your own risk.
● Before the use for the first time, the four machine legs under the frame shall be shall be adjusted to make the machine in a state level without shaking,
● Lubricate the lubrication parts before starting according to the requirements.
● Turn on the external air supply switch and plug again before starting; when turning it off, turn the power off and then shut the air supply switch,
● Air supply pressure shall be not less than 0.6MPa.
● The operating personnel shall pay attention to observing the operation of different parts in the running of machine, and they shall not leave with the machine on.
● Under the failure during equipment operation, please press the scram button, turn the power off and check the cause of problems. Never knock or hit the machine in the repair, so as not to damage the machine.
● Clean after turning off the main switch,
● The machine may be changed without prior notice.
Important Safety Logos
Be sure to read this manual in advance before repairing and adjusting the machine. Please pay special attention to the safety logos on machine, and the commonly-used safety logos are as follows:
|
|
Watch your hand: do not get close to the gear transmission part in the process of machine operation, so as to avoid clamping hand. |
|
Avoid pinching: in the process of operation, do not get close and touch the ultrasonic head, bottom cup mold, so as to avoid pinching. |
|
Do not stretch the hands in rolling: in the process of operation, get away from the bearing and transmission parts as far as possible, so as to avoid hands be caught and causing safety accidents. |
|
No rotation in repair: when the machine is repaired, ensure that each axis and moving part is in a stationary state, and it is prohibited to rotate the machinery and equipment in the process of maintenance, so as not to cause personal injury. |
|
Pay attention to safety: in the production process, the staff shall be vigilant, pay attention to safety and check erroneous ideas at the outset. |
|
Ground connection: in the connection of line, ensure the ground electrode is grounded, so as to prevent to get an electric shock. |
|
Beware of electric shock: in the process of operation, beware of electric shock (regularly check the electricity line, and please do protective measures if there is any breakage). |
|
Ban switching on: in the process of maintenance, it is prohibited to switch on the power, so as to avoid electric shock accidents. |
Hot Tags: noodle bowl machine, China noodle bowl machine manufacturers, suppliers, factory, paper glass plate making machine, aluminium foil cup making machine, paper cup machine manual, tea cup paper cutting machine, disposable paper cup machine, office cover making machine